[Free] 2018(Mar) EnsurePass Examcollection Cisco 210-060 Dumps with VCE and PDF Download 71-80

Ensurepass.com : Ensure you pass the IT Exams 2018 Mar Cisco Official New Released 210-060
100% Free Download! 100% Pass Guaranteed!

Implementing Cisco Collaboration Devices v1.0

Question No: 71

Which component is needed for a voice call to be processed between the enterprise Cisco Unified Communications system and a cell phone via the PSTN?

  1. Cisco Analog Voice Gateway VG224

  2. Cisco Unified Communications Manager call processing node

  3. Cisco Unified Communications Manager Music On Hold node

  4. Cisco Integrated Service Router with digital signal processor resources

Answer: D

Question No: 72

The IP phone of user A is registered with Cisco Unified Communications Manager subscriber1 while the IP phone of user B is registered with subscriber2. User A is speaking to user B on an active call. A junior network engineer mistakenly reboots subscriber1.

What effect does this have on the call?

  1. User A can hear B, but B cannot hear A.

  2. User A cannot hear B, but B can hear A.

  3. This action drops the call.

  4. This action does not affect the call.

  5. The call remains active, but quality may suffer.

Answer: D

Question No: 73

Which three features of the Cisco Unified Attendant Console can a user use to streamline the company telephony communications? (Choose three.)

  1. promotes a phone call into a video call

  2. uses presence status to determine availability

  3. reverts back to operator a transferred call

  4. provides a conference call with up to 10 participants

  5. provides call detail records reports to upper management

  6. defines operator working hours and automatically redirect calls

Answer: B,C,F

Question No: 74

Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500 MCU?

  1. Staticlt;ip addressgt;lt;netmaskgt;lt;default gatewaygt;lt;DNS server addressgt;

  2. Network iplt;ip addressgt;lt;netmaskgt;lt;default gatewaygt;lt;DNS server addressgt;

  3. Xconfig network addresslt;ip addressgt;lt;netmaskgt;lt;default gatewaygt;

  4. Xconfig network addresslt;ip addressgt;lt;netmaskgt;lt;default gatewaygt;lt;DNS server addressgt;

Answer: A

Question No: 75

After getting reports that users cannot make calls out to the PSTN, a network administrator opens the Cisco Unified Communications Manager Administration web page and begins to review route patterns. Why would the administrator look here when troubleshooting PSTN connectivity troubles?

  1. A route pattern contains a list of gateways that can reach the PSTN.

  2. A route pattern contains dial plan information for calling the PSTN.

  3. A route pattern contains the necessary privileges for calling the PSTN.

  4. A route pattern contains a list of SIP trunks that can reach the PSTN.

Answer: B

Question No: 76

A user wants their name to show on their phone instead of their directory number. Which configuration item allows an administrator to do this?

  1. Line Text Label

  2. Alerting Name

  3. External Phone Number Mask

  4. Caller Name

  5. Description

Answer: A

Question No: 77

The receptionist has a Cisco 7965 phone with 24-button side-car configuration. The side- car button of the phone does not light up when the line is in use. Which phone configuration is missing?

  1. Subscriber calling search space

  2. Location

  3. BLF audible alert setting

  4. Phone button template

Answer: A

Question No: 78

A field technician must reset a single 7965 IP phone so that it will be discovered on the network again and request an IP address from DCHP. Which steps should the network engineer provide?

  1. Have field technician select the Settings button on phone, then dial # # * * *

  2. Have field technician select the Settings button on phone, then dial # # * # #

  3. Have field technician select the Settings button on phone, then dial * * # * *

  4. Have field technician select the Settings button on phone, then dial * * # # #

Answer: C

Question No: 79

A company wants to deploy IP telephony on its network. The engineer has to allow the existing switches to support Cisco IP phones that are connected to a Cisco Unified Communications Manager server. Which command should be configured on the switches to allow voice traffic on VLAN 50?

  1. switchport access vlan 50

  2. switchport mode access

  3. switchport mode trunk

  4. switchport voice vlan 50

Answer: D

Question No: 80

A group of managers for a company has requested IP telephony reports with performance data and graphs. Which steps should the network administrator take to gather these reports using Cisco Unified Communications Manager web interface?

  1. Select Cisco Unified Serviceability gt; Trace gt; Serviceability Reports Archives.

  2. Select Cisco Unified Serviceability gt; Alarm gt; Serviceability Reports Archives.

  3. Select Cisco Unified Reports gt; Tools gt; Serviceability Reports Archives.

  4. Select Cisco Unified Reports gt; Trace gt; Serviceability Reports Archives.

  5. Select Cisco Unified Serviceability gt; Tools gt; Serviceability Reports Archives.

Answer: E

100% Ensurepass Free Download!
Download Free Demo:210-060 Demo PDF
100% Ensurepass Free Guaranteed!
210-060 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.