[Free] 2018(Jan) EnsurePass Dumpsleader Microsoft 70-687 Dumps with VCE and PDF Download 21-30

Ensurepass.com : Ensure you pass the IT Exams 2018 Jan Microsoft Official New Released 70-687
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-687.html

Configuring Windows 8.1

Question No: 21 DRAG DROP – (Topic 1)

A local printer named PRINTER1 is shared from a client computer named COMPUTER1 that run a 64-bit version of Windows 8.1.

The workgroup contains client computers that run a 32-bit version of Windows 8.1. Computers in the workgroup can#39;t currently print to PRINTER1.

You need to ensure that the workgroup computers can print to PRINTER1.

Which three actions should you perform in sequence? (To answer, move the appropriate actions to the answer area and arrange the correct order.)

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Ref: http://technet.microsoft.com/library/cc732946.aspx

http://technet.microsoft.com/library/cc732946.aspx Update and Manage Printer Drivers

Add drivers for client computers running 32-bit or 64-bit versions of Windows

To support client computers that use different processor architectures than the print server, you must install additional drivers. For example, if your print server is running a 64-bit version of Windows and you want to support client computers running 32-bit versions of Windows, you must add x86-based drivers for each printer.

Further information: http://www.printmanager.com/cms.php?aid=54amp;fullpage=1amp;support=8 Mixing 32 bit and 64 bit Print Server Architectures

64 bit Print Server with 32 bit Clients:

In the following scenario, we will be covering how to easily allow 32 bit Windows Clients to print through shared print queues on a 64 Bit Server.

  1. Download 32 bit Driver:

  2. Open Sharing Properties:

  3. Specify Additional Drivers:

    Ensurepass 2018 PDF and VCE

  4. Select your 32 Bit Driver:

  5. Test and Print:

    Question No: 22 – (Topic 1)

    You update the video card driver on a computer that runs Windows 8.1.

    You can no longer configure the display settings to extend the display to a projector. You need to restore the display options as quickly as possible and retain all user data. What should you do?

    1. Roll back the video card driver to the previous version.

    2. Run the DisplaySwitch/extend command.

    3. Run the sic /scannow command.

    4. Start the computer from the Windows 8.1 installation media and perform a system image recovery.

Answer: A Explanation:

Ensurepass 2018 PDF and VCE

Rolling back the driver is the simplest and fastest solution. Example:

Ensurepass 2018 PDF and VCE

Further Information:

The DisplaySwitch /extend command might not work is the driver is broken. The sfc /scannow command checks system files for consistency.

And a system image recovery will affect the user data.

Question No: 23 HOTSPOT – (Topic 1)

You install Windows 8.1 Enterprise on new laptops that will be shipped to remote users in the sales department of your company. You create new VPN connections on the laptops.

Your company security policy requires that the maximum allowed network outage time for the VPN connection should be less than 10 minutes.

You need to configure the required timeout.

Which protocol should you use? (To answer, configure the appropriate option or options in the answer area.)

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

http://technet.microsoft.com/en-us/library/dd469724(v=ws.10).aspx RRAS Server Properties Page – IKEv2 Tab

Network outage time (minutes)

Specifies the maximum amount of time, in minutes, that IKEv2 packets are retransmitted without a response before the connection is considered lost. Higher values support connection persistence through network outages. The default value is 30 minutes.

http://blogs.technet.com/b/sbs/archive/2014/05/19/configuring-vpn-on-windows-server- 2012-r2-essentials.aspx

Understanding VPN configuration in Windows Server 2012 R2 Essentials

Default Settings of VPN on Windows Server 2012 R2 Essentials

To check the default settings for the VPN, open Routing and Remote Access Manager. Right click server name, and select Properties.

The IKEv2 tab consists of the default options to control the IKEv2 client connections and Security Association expiration.

Ensurepass 2018 PDF and VCE

Question No: 24 DRAG DROP – (Topic 1)

A desktop computer runs Windows 8.1. The computer is joined to an Active Directory Domain Services (AD DS) domain named contoso.com.

You have two domain user accounts:

->A primary account named User1 that does not have domain administrative privileges.

->An account named Admin1 that has administrative privileges in the domain.

You are currently logged in as User1. You need to run an application named appl.exe.

You have the following requirements:

->Start the application by using your administrative credentials.

->Minimize the application load time.

You need to complete the command to meet the requirements.

Which command segments should you use to complete the command? (To answer, drag the appropriate command segments to the correct locations in the answer area. Command segments may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

http://technet.microsoft.com/en-us/library/cc771525.aspx Runas

Allows a user to run specific tools and programs with different permissions than the user#39;s current logon provides.

Syntax

runas [{/profile | /noprofile}] [/env] [{/netonly | /savecred}] [/smartcard] [/showtrustlevels] [/trustlevel] /user:lt;UserAccountNamegt; quot;lt;ProgramNamegt; lt;PathToProgramFilegt;quot;

Parameters

/profile

Loads the user#39;s profile. This is the default. This parameter cannot be used with the

/netonly parameter.

/no profile

Specifies that the user#39;s profile is not to be loaded. This allows the application to load more quickly, but it can also cause a malfunction in some applications.

/user:lt;UserAccountNamegt; quot;lt;ProgramNamegt; lt;PathToProgramFilegt;quot;

Specifies the name of the user account under which to run the program, the program name, and the path to the program file. The user account name format should be

lt;Usergt;@lt;Domaingt; or lt;Domaingt;\lt;UserAccountNamegt;.

Question No: 25 – (Topic 1)

You administer Windows 8.1 computers in your company network.

You install a new video driver. The computer will not start properly after restart. You are able to enter Safe Mode with Command Prompt.

You need to be able to start normally. You also need to ensure that user data is not lost. What should you do?

  1. Run the rstrui.exe command.

  2. Roll back the driver.

  3. Turn on File History.

  4. Create a restore point.

Answer: A

Explanation: Personal comment:

Creating a restore point will not help you at this moment. Nor will File History.

You cannot roll back the driver, only disable it from starting – see the Further information section.

Your only hope is using System Restore to restore the system to the state previous to the driver installation. This will also preserve the user data. This has been available since Windows XP. One can only hope it still works in Windows 8…

http://support.microsoft.com/kb/304449

How to start the System Restore tool by using the safe mode option with the Command prompt in Windows XP

How to start System Restore by using the Command prompt

  1. At the command prompt, type %systemroot%\system32\restore\rstrui.exe, and then press ENTER.

  2. Follow the instructions that appear on the screen to restore your computer to a functional state.

Further Information: http://support.microsoft.com/kb/927525

After you install a device or update a driver for a device, Windows Vista or Windows 7 may not start

Use the Windows Recovery Environment to repair Windows Vista or Windows 7

  1. Use the Command Prompt option in the Windows Recovery Environment to disable the driver that stops the operating system from starting.

    Question No: 26 – (Topic 1)

    A company has client computers that run Windows 8.1. The corporate network is configured for IPv4 and IPv6.

    You need to disable Media Sensing for IPv6 on the client computers without affecting IPv4 communications.

    What should you do on each client computer?

    1. Run the Disable-NetAdapterBinding Windows PowerShell cmdlet.

    2. Run the Disable-NetAdapter Windows PowerShell cmdlet.

    3. Run the Set-NetlPv6Protocol Windows PowerShell cmdlet.

    4. Run the Set-NetlPv4Protocol Windows PowerShell cmdlet.

Answer: C

Explanation: http://technet.microsoft.com/en-us/library/hh826144.aspx Set-NetIPv6Protocol

Set-NetIPv6Protocol -DhcpMediaSenselt;DhcpMediaSensegt;

Specifies a value for Media Sense. The cmdlet modifies the value for this setting.

Media Sense provides a mechanism for the network adapter to notify the protocol stack of media connect and disconnect events. These events trigger the DHCP client to take an action, such as attempting to renew a DHCP lease or removing routes that are related to a disconnected network. When Media Sense is enabled, the network parameters on the laptop of a roaming user are automatically and transparently updated without requiring a restart when the user moves from one location to another. The acceptable values for this parameter are:

– Enabled

– Disabled

The default value is Enabled.

Further information: Disable-NetAdapterBinding

The Disable-NetAdapterBinding cmdlet disables a binding to a network adapter. Running this cmdlet causes loss of network connectivity depending on the binding that is disabled. Note: Disabling some adapter bindings can automatically enable other network adapter bindings.

Disable-NetAdapter

The Disable-NetAdapter cmdlet disables a network adapter. A network adapter must be enabled to connect to a network. This cmdlet causes loss of network connectivity of the specified network adapter. Note: Do not disable the network adapter being used to manage a remote computer. By default the user will be prompted to confirm the network adapter should be disabled

Set-NetlPv4Protocol Is not a valid cmdlet.

Question No: 27 – (Topic 1)

A company has client computers that run Windows 8.1. Each computer has two hard drives.

You need to create a dynamic volume on each computer that maximizes write performance.

Which kind of dynamic volume should you create?

  1. Striped volume

  2. RAID 5 volume

  3. Spanned volume

  4. Mirrored volume

Answer: A Explanation:

http://technet.microsoft.com/en-us/library/cc737048(v=ws.10).aspx What Are Dynamic Disks and Volumes?

Types of Dynamic Volumes

A dynamic volume is a volume that is created on a dynamic disk. Dynamic volume types include simple, spanned, and striped volumes.

Striped Volumes

Striped volumes improve disk input/output (I/O) performance by distributing I/O requests across disks. Striped volumes are composed of stripes of data of equal size written across each disk in the volume. They are created from equally sized, unallocated areas on two or more disks.

Striped volumes cannot be extended or mirrored and do not offer fault tolerance. If one of the disks containing a striped volume fails, the entire volume fails, and all data on the striped volume becomes inaccessible. The reliability for the striped volume is less than the least reliable disk in the set.

Further Information: RAID-5 Volumes

A RAID-5 volume is a fault-tolerant volume that stripes data and parity across three or

more disks. Parity is a calculated value that is used to reconstruct data if one disk fails. RAID-5 volumes are typically created by the user who requires fault-tolerance and who has at least three disks in their computer. If one of the disks in the RAID-5 volume fails, the data on the remaining disks, along with the parity information, can be used to recover the lost data. RAID-5 volumes are well-suited to storing data that will need to be read frequently but written to less frequently. Database applications that read randomly work well with the built-in load balancing of a RAID-5 volume.

Spanned Volumes

Spanned volumes combine areas of unallocated space from multiple disks into one logical volume. The areas of unallocated space can be different sizes. Spanned volumes require two disks, and you can use up to 32 disks.

Mirrored Volumes

A mirrored volume is a fault-tolerant volume that provides a copy of a volume on another disk. Mirrored volumes provide data redundancy by duplicating the information contained on the volume. The two disks that make up a mirrored volume are known as mirrors. Each mirror is always located on a different disk. If one of the disks fails, the data on the failed disk becomes unavailable, but the system continues to operate by using the unaffected disk.

Mirrored volumes are typically created by the user who requires fault-tolerance and who has two disks in their computer. If one disk fails, the user always has a copy of their data on the second disk. Mirrored volumes provide better write performance than RAID-5 volumes.

Question No: 28 – (Topic 1)

A company has client computers that run Windows 8.1.

You install a new device on a client computer. The device installation includes an application that runs when the computer starts. You experience problems with the application.

You need to prevent the application from running when the computer starts, without affecting any other application.

What should you do?

  1. Configure the application by using Task Manager.

  2. Run the bcdedit command.

  3. Configure the device by using Device Manager.

  4. Run the msconuig command.

Answer: A Explanation:

It’s a new feature of Windows 8.1

http://pcworld.co.nz/pcworld/pcw.nsf/feature/20-essential-windows-8-tips-and-tricks

Ensurepass 2018 PDF and VCE

Question No: 29 – (Topic 1)

A company has client computers that run Windows 8.1. Each employee has one client computer at the office. Some employees also have personal computers at home.

The company has applications that run only on Windows 8.1.

You need to deploy Windows To Go so that employees can run the applications on their home computers.

Which two command-line tools should you use? (Each correct answer presents part of the solution. Choose two.)

  1. isoburn

  2. BdeHdCfg

  3. ImageX

  4. bcd boot

Answer: C,D Explanation:

If you get DISM as an additional option in this question, I would select DISM.

DISM is already integrated in the Windows 8.1 OS and it is the newer feature than ImageX. To use ImageX we have to install Windows 8.1 AIK first.

Ensurepass 2018 PDF and VCE

Ensurepass 2018 PDF and VCE

Question No: 30 – (Topic 1)

A company has client computers that run Windows 8.1. The company uses Windows BitLocker Drive Encryption with the data-only option o all client computers.

You delete a file containing highly confidential information from your computer.

You need to clear the free space on the hard drive to minimize the chance of the confidential information being recovered.

Which command should you run on the client computer?

  1. manage-bde -w

  2. chkdsk/spotfix

  3. diskpart clean

  4. BdeHdCfg -target c: shrink

Answer: A Explanation:

http://technet.microsoft.com/en-us/library/jj647761.aspx Manage-bde: WipeFreeSpace

Syntax:

manage-bde -WipeFreeSpace|-w [lt;Drivegt;] [-Cancel] [-computername lt;Namegt;] [{-?|/?}] [{- help|-h}]

Wipes the free space on the volume removing any data fragments that may have existed in the space. Running this command on a volume that was encrypted using the “Used Space Only” encryption method provides the same level of protection as the “Full Volume Encryption” encryption method.

Example:

The following example illustrates using the -w command to create wipe the free space on drive C.

manage-bde -w C:

Further information:

http://technet.microsoft.com/en-us/library/cc730714.aspx Chkdsk

chkdsk [lt;Volumegt;[[lt;Pathgt;]lt;FileNamegt;]] [/f] [/v] [/r] [/x] [/i] [/c] [/l[:lt;Sizegt;]] [/b] http://technet.microsoft.com/en-us/library/cc731145.aspx

Clean

The Diskpart Clean command removes any and all partition or volume formatting from the disk with focus.

http://technet.microsoft.com/en-us/library/ff829850.aspx Bdehdcfg

Prepares a hard drive with the partitions necessary for BitLocker Drive Encryption.

100% Ensurepass Free Download!
Download Free Demo:70-687 Demo PDF
100% Ensurepass Free Guaranteed!
70-687 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No