Question No: 41
You have a server namedServer1.Server1is the member of a workgroup.
OnServer1, you create a local user account namedUser1, as shown in the following exhibit. (Click the Exhibit button.)
OnServer1, you create a share namedShare1. You assignUser1Full control permissions toShare1. You copy the source files for Windows 8 toShare1.
When attempting to accessShare1from Windows Preinstallation Environment (Windows PE),User1receives an error message.
You need to ensure thatUser1can accessShare1from Windows PE. What should you do?
From Server1, modify the Advanced Sharing properties.
Clear the Password never expires check box for the user account of User1.
Add a password to the user account of User1.
From Server1, modify the Advanced settings in System Properties.
Question No: 42
You have a server named Server1that runs Windows Server 2012 and has the Windows Deployment Services server role installed.
You recently removed a third-party DHCP server from the network, and then installed the DHCP Server server role onServer1.
You create a scope onServer1.
You discover that client computers attempting to receive a Windows 8 image fail to connect toServer1.
You verify that the client computers on the network can receive an IP address fromServer1.
You need to ensure that the computers attempting to receive an image can connect toServer1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
From the DHCP console, click Server Options, and then set the value of Option 66 to Server1.
From the Windows Deployment Services console, click the PXE Response tab, and then set the value of the Delay in seconds to 3.
From the Windows Deployment Services console, click the DHCP tab, and then select the Do not listen on port 67 check box.
From the DHCP console, click Server Options, and then set the value of Option 67 to install.wim.
From the Windows Deployment Services console, click the DHCP tab, and then select the Configure DHCP option 60 to indicate that this is also a PXE server check box.
Explanation: If DHCP and WDS roles are installed on same server – In this case you must tell WDS not to listen on port 67 and set DHCP option 60 so that clients can find the WDS server. So options Do not listen on port 67 (C) and Configure DHCP option 60 to indicate that this server is also a PXE server (E) must be checked.
Deploying Windows 7 Using Windows Deployment Services Snap 1 Reference:Deploying Windows 7 Using Windows Deployment Services
Question No: 43
You plan to deploy multiple client computers that will each contain a 4-TB hard disk drive. The hard disk drives will be initialized as GPT drives.
You need to identify the maximum number of primary partitions that can be created on a GPT drive.
How many primary partitions should you identify?
64 C. 128 D. 256
Question No: 44
You create and deploy an image to a reference computer. You plan to deploy the image to several client computers.
You need to meet the following requirements for the planned deployment:
->Remove all of the unique system information from the image.
->Display the Windows Welcome screen the first time a new computer starts.
Which command should you run?
sysprep /audit /generalize /reboot
sysprep /oobe /generalize /shutdown
sysprep /audit /oobe /generalize
sysprep /generalize /quiet /reboot
Question No: 45
You work for an OEM system builder named Fabnkam, Inc.
Fabrikam sells personal computers that have Windows 8 preinstalled.
You need to recommend a recovery solution that provides customers with the ability to repair their computers quickly, while preserving data and important customizations. The solution must not back up data in advance and must comply with the Microsoft OEM system builder license.
What should you recommend?
The Microsoft Diagnostics and Recovery Toolset (DaRT)
Question No: 46
You work for an OEM system builder.
What are three possible ways to distribute Windows 8 OEM desktop operating system licenses? (Each correct answer presents a complete solution. Choose three.)
Asealed System Builder pack that comes with the purchase of a new computer that has an operating system preinstalled
Asealed System Builder pack without the purchase of a computer
Asealed System Builder pack that comes with the purchase of a new computer that does not have an operating system preinstalled
An unsealed System Builder pack without the purchase of a computer
An unsealed System Builder pack that comes with the purchase of a new computer that does not have an operating system preinstalled
An unsealed System Builder pack that comes with the purchase of a new computer that has an operating system preinstalled
Explanation: Windows 8 licensing terms for OEM system builder packs
(F) Opened pack
By opening the pack, you agree to the license terms. You must preinstall the license for Windows desktop software onto a fully assembled PC#39;s hard drive using the OPK.
Unopened packs can be delivered to another system builder-an OEM, assembler, refurbisher, or preinstaller of software on computer systems.
Question No: 47
Your company plans to implement a deployment solution for 500 new client computers. The company identifies the following requirements for the planned implementation:
->A technician must be able to deploy operating systems to computers that use the ARM architecture.
->The solution must NOT require the implementation of an Active Directory forest.
->A technician must be able to schedule the deployment of operating systems.
You need to recommend a solution that meets the requirements.
Which two technologies should you include in the recommendation? (Each correct answer presents part of the solution. Choose two.)
Windows Server 2012 Standard
Windows Deployment Services (WDS)
The Microsoft Deployment Toolkit (MDT)
Windows Server 2008 R2 Enterprise
Microsoft System Center 2012
Windows Server 2008 R2 Standard
Explanation: WDS can now(windows Server 2012)deploy images to ARM clients, which is
a CPU architecture that is specially engineered for low-cost, low-power consumption devices such as tablets, cell phones, GPS units, portable game consoles, network routers, and media players.
Not C:MDT does not support ARM processor-based versions of Windows. Reference:What#39;s New for Windows Deployment Services for Windows Server 2012
Question No: 48
You work for an OEMsystem builder named Fabrikam,Inc.
You use Windows Deployment Services (WDS) to start bare metal deployments that use Pre-Boot Execution Environment (PXE) and a 32-bit boot image. The boot image starts to a command prompt and automatically establishes a network connection.
You plan to create a reference image of the 64-bit version of Windows 8 Pro.
From the distribution share, you execute Windows Setup from the Windows 8 Pro 64-btt source files and you receive an error message indicating that Windows Setup is incompatible with the version of Windows that you are running.
You need to ensure that you can create the reference image. What should you do?
Configure the BIOS to use Unified Extensible Firmware Interface (UEFI) mode.
Run setup.exe and specify the /InstallFrom parameter.
Create a boot image that contains a 64-bit version of Windows Preinstallation Environment (Windows PE).
Specify the MetaData setting in an answer file.
Question No: 49
You work for an OEM system builder named Fabrikam, Inc.
You plan to deploy Windows by running setup.exe and an answer file. You need to configure the answer file to perform the following:
->Install an out-of-box device driver.
->Set the path to the out-of-box device driver to a network share.
Which two possible configuration passes can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
Explanation: You can install additional device drivers during Windows Setup by creating an answer file. In this answer file, you can specify the paths to device drivers on a network share (or a local path) by adding the Microsoft-Windows-PnpCustomizationWinPE or Microsoft-Windows-PnpCustomizationNonWinPE components and specifying the configuration passes in which you intend to install them. You can install device drivers in the windowsPE (D), offlineServicing (C), auditUser or auditSystem configuration passes.
Reference:Add Device Drivers During Windows Setup
Question No: 50
You have 3 reference computer that runs the English version of Windows 7 Ultimate.
You plan to provide customers with the ability to switch between an English user interface (UI) and a German UI in Windows 7.
You start the reference computer in audit mode.
You need to add the German language pack to the reference computer.
Which two possible tools can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
System in Control Panel
Region and Language in Control Panel
Programs and Features in Control Panel
Explanation: C: In Windows 7, you can download languages in two ways:
Using Windows Update. If you#39;re running an Ultimate or Enterprise edition of Windows, you can download available language packs by using Windows Update. Language packs installed using Windows Update provide a fully translated version of Windows dialog boxes, menu items, and help content. All the languages available for this type of download have a quot;Learn howquot; link in the right column of the table below.
*Using Microsoft Download Center. You can download Language Interface Packs (LIPs) from the Microsoft Download Center by using the links below.
C,D: Install a Language Pack (LIP)
Open the Control Panel (icon view), and click on the Windows Update icon. OR
Open the Control Panel (icon view), and click on the Region and Language icon. Click on the Keyboards and Languages tab, then click on the Install/uninstall languages button.
100% Free Download!
–Download Free Demo:74-697 Demo PDF
100% Pass Guaranteed!
–Download 2018 EnsurePass 74-697 Full Exam PDF and VCE
EnsurePass ExamCollection Testking Lowest Price Guarantee Yes No No Up-to-Dated Yes No No Real Questions Yes No No Explanation Yes No No PDF VCE Yes No No Free VCE Simulator Yes No No Instant Download Yes No No