[Free] 2017(Nov) Dumps4cert Testinsides Cisco 300-180 Dumps with VCE and PDF Download 91-100

Dumps4cert 2017 Nov Cisco Official New Released 300-180
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/300-180.html

Troubleshooting Cisco Data Center Infrastructure

Question No: 91 – (Topic 1)

During the installation of Windows 2008 64-bit operating system on a Cisco UCS server, the RAID controller is not found. What is the cause of the problem?

  1. The Cisco IMC firmware needs to be updated.

  2. The LSI option ROM needs to be configured by pressing Ctrl-H during post.

  3. The LSI drivers are not bundled and need to be loaded by clicking the Load Driver option to point to the correct drivers.

  4. Windows 2008 64-bit operating system is not supported on Cisco UCS servers.

Answer: C

Question No: 92 – (Topic 1)

At any given time, each server can be associated with how many service profiles?

  1. 1

  2. 2

  3. 5

  4. 10

  5. unlimited

Answer: A

Question No: 93 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which of these is an extension of the virtual machine abstraction that is applied to physical servers?

  1. service profile

  2. compute profile

  3. organization profile

  4. locale profile

  5. role profile

Answer: A

Question No: 94 HOTSPOT – (Topic 1)

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Explanation:

Write-through

Question No: 95 – (Topic 1)

You upgrade an operating system on a Cisco UCS C-Series Rack Server. After the upgrade, you discover that the performance of the server is much slower than expected. You verify that the operating system is on the Cisco support matrix for the rack server.

Which two firmware types are the possible cause of the performance issue? (Choose two.)

  1. fNIC

  2. eNIC

  3. mptspi

  4. vNIC

  5. vSwitch

Answer: A,B

Question No: 96 – (Topic 1)

As a Cisco UCS administrator, you have a large deployment of C-Series servers. You decide to integrate these into a Cisco UCS Manager environment to simplify management. Which two of these will you need to purchase? (Choose two.)

  1. two fabric interconnects

  2. a dedicated Cisco IMC

  3. two fabric extenders

  4. two I/O modules

Answer: A,C

Question No: 97 – (Topic 1)

Which names are reserved when custom roles are created in Cisco UCS Manager RBAC?

  1. network-admin, network-operator, vdc-admin, vdc-operator, and server-admin

  2. cisco, cisco123, cisco-operator, cisco-admin, and root

  3. ucs-admin, ucs-operator, server-admin, server-operator, and cisco-admin

  4. ucs, ucs123, server-admin, server-operator, and sysroot

Answer: A

Question No: 98 – (Topic 1)

After a Cisco UCS Manager upgrade, you discover issues relating to the IQN of several service profiles. Which two options are possible causes of the problem? (Choose two.)

  1. duplicate service profiles

  2. a duplicate IQN within a service profile

  3. a duplicate IQN across multiple service profiles

  4. an unsuccessful upgrade

  5. incorrect VSAN settings

Answer: B,C

Question No: 99 – (Topic 1)

A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B-Series blade server; however, the boot fails. What is the cause of this failure?

  1. The local disk must be the first device in the boot order.

  2. eUSB is not a supported boot device.

  3. eUSB support is available only on the Cisco UCS C-Series rack server.

  4. eUSB is not the first device in the boot order for the server.

Answer: D

Question No: 100 – (Topic 1)

A customer is troubleshooting the CIMC and resets the CIMC. Which three settings are defaults for the CIMC after it is reset? (Choose three.)

  1. SSH and Telnet are disabled from accessing the CIMC CLI.

  2. HTTPS enabled for accessing the CIMC GUI.

  3. A user account named admin exists that has a password of password.

  4. DHCP is disabled on the management port.

  5. The boot order is EFI, CDROM, PXE (using LoM), FDD, and HDD.

  6. KVM and vMedia are disabled.

  7. USB is disabled.

Answer: B,C,E

100% Free Download!
Download Free Demo:300-180 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4cert 300-180 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4cert IT Certification PDF and VCE