[Free] 2017(Nov) Dumps4cert Testinsides Cisco 300-180 Dumps with VCE and PDF Download 81-90

Dumps4cert 2017 Nov Cisco Official New Released 300-180
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/300-180.html

Troubleshooting Cisco Data Center Infrastructure

Question No: 81 – (Topic 1)

You are troubleshooting an FCoE boot issue on a Cisco UCS C220 M3 server with a VIC 1225 CNA. Which two pieces of information can you directly infer from the output of the show zone active command below? (Choose two.)

zone name Server_1-to-Storage vsan 11 pwwn 50:06:01:60:3b:a0:08:9f [Storage]

* fcid 0x3b000b [pwwn 20:00:00:25:b5:04:0a:02] [C22_Server]

  1. The storage controller is not logged into the fabric.

  2. The server is not logged into the fabric.

  3. Only the storage controller is logged into the fabric.

  4. Only the server is logged into the fabric.

  5. The initiator and target cannot communicate because they are on the wrong VSAN.

  6. The WWPN of the storage controller is mistyped.

  7. The initiator and target cannot communicate because the zone name does not match the server name (C22_Server).

Answer: A,D

Question No: 82 – (Topic 1)

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Refer to Exhibit 4. Which selection is true regarding the configured Write Cache policy on the RAID adapter?

  1. Data written is stored in the cache and also written through to the physical drives

  2. Data written is stored in the cache and will be written to the physical drives when bandwidth is available

  3. Write Through mode poses the risk of data corruption if a BBU is not installed

  4. Write Through mode falls back to Write Back mode if the BBU fails

Answer: C

Question No: 83 HOTSPOT – (Topic 1)

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Question No: 84 – (Topic 1)

You are installing Microsoft Windows Server 2008 R2 on a Cisco UCS C210 M2 server, and the installer does not see local storage on the LSI MegaRAID SAS 9260-4i controller that is installed. Which statement explains the issue?

  1. The driver is not included in the installer DVD. Press F6 to load the LSI RAID driver from CD or virtual media.

  2. The virtual disk is not created and online.

  3. The LSI 9260-4i is only supported by Red Hat Enterprise Linux and VMware vSphere

    4.0 and later.

  4. The installer DVD for Microsoft Windows Server 2008 R2 did not include the LSI driver until SP2.

Answer: B

Question No: 85 – (Topic 1)

RBAC is a method of restricting access for a particular user on which two of these?

(Choose two.)

  1. roles

  2. realm

  3. locales

  4. RADIUS

  5. LDAP

Answer: A,C

Question No: 86 – (Topic 1)

You attempt to boot a supported Linux operating system live image from the eUSB in a Cisco UCS blade-server environment, but the boot fails. Which option is the most likely cause of the failure?

  1. In the Service Profile, a device other than the eUSB is set first in the boot order for the server.

  2. The eUSB license is unavailable or the grace period of the license is expired.

  3. The blade servers are unable to boot from the eUSB. The eUSB is used only for virtual machines.

  4. Access to the eUSB is disabled for that blade server by Power Manager.

Answer: A

Question No: 87 – (Topic 1)

How many FSM tasks can run concurrently on a server?

  1. 1

  2. 2

  3. 4

  4. 16

Answer: A

Question No: 88 – (Topic 1)

Which option describes how you can reset the BIOS password of a Cisco UCS C-Series Rack-Mount Server?

  1. Turn off the server. Press and hold the F7 key, and then turn on the server.

  2. Reset the jumper on the motherboard.

  3. Press and hold the power switch for 20 seconds.

  4. Turn off the server. Press and hold the F2 key, and then turn on the server.

Answer: B

Question No: 89 – (Topic 1)

You discover that a new blade server encounters power spikes during peak hours. Which action occurs during the power spikes if you use manual blade-level power capping?

  1. The blade shuts down.

  2. An alert is generated.

  3. Power is reduced.

  4. The chassis enters standby mode.

Answer: C

Question No: 90 – (Topic 1)

Which two commands check for DIMM errors in a Cisco UCS environment? (Choose two.)

  1. UCS-TEST/chassis#show error-recovery

  2. UCS-TEST/chassis/server/memory-array#show stats

  3. UCS-TEST/chassis/server#show execute-disable

  4. UCS-TEST/chassis/server/memory-array #show block

  5. UCS-TEST/chassis/server#show memory-array detail

  6. UCS-TEST/chassis/server#show error-recovery

Answer: B,E

100% Free Download!
Download Free Demo:300-180 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4cert 300-180 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4cert IT Certification PDF and VCE