[Free] 2017(Nov) Dumps4cert Testinsides Cisco 300-180 Dumps with VCE and PDF Download 131-140

Dumps4cert 2017 Nov Cisco Official New Released 300-180
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/300-180.html

Troubleshooting Cisco Data Center Infrastructure

Question No: 131 – (Topic 1)

Which option is a valid file extension for a CIMC configuration file?

  1. .xml

  2. .json

  3. .txt

  4. .exe

  5. .zip

Answer: A

Question No: 132 – (Topic 1)

Which statement is true with respect to resetting a forgotten Cisco IMC admin password on a Cisco UCS C-Series rack-mount server?

  1. Download the Cisco IMC password reset utility ISO file from Cisco.com and boot from virtual media. The server will boot the Linux Live CD and reset the password to #39;password#39;.

  2. Download the Cisco IMC password reset EFI plugin file from Cisco.com to a USB flash drive and boot to the EFI shell. The startup.nsh file will auto-load and reset the password to #39;password#39;.

  3. Shut down the server and remove all power supplies for 3 minutes to allow the password capacitor to discharge. Use the default password #39;password#39; to log back in.

  4. Shut down the server and remove all power cords. Open the case and short the jumper specified in the model-specific Cisco UCS C-Series Server Installation and Service Guide.

Answer: D

Question No: 133 – (Topic 1)

You successfully install VMware ESXi 5.0 U1 on a Cisco UCS B200 M3 server to a Fibre Channel LUN. When you reboot the server, you see the message quot;Reboot and Select Proper Boot device or insert Boot Media in selected Boot device and press a key.quot; What are the first two pieces of information you should gather to troubleshoot the boot failure? (Choose two.)

  1. Connect to the NX-OS shell via the CLI and run the show npv flogi-table command.

  2. SSH to the MDS 9124 and run the show flogi database command.

  3. Validate the boot target WWPN and LUN ID in the service profile.

  4. Validate the correct source WWPN in the service profile vHBA definition.

  5. Validate zoning for your WWPN on the Cisco MDS 9124.

  6. Validate that the boot order indicates the vHBA as the first device.

  7. Ensure LUN masking is correctly configured on the storage controller.

Answer: C,F

Question No: 134 – (Topic 1)

Refer to the exhibit.

Dumps4Cert 2017 PDF and VCE

Which tab would be the most useful for troubleshooting a blade discovery problem?

  1. Faults

  2. Events

  3. FSM

  4. Servers

Answer: C

Question No: 135 – (Topic 1)

You have a Cisco UCS Fabric Interconnect in Fibre Channel end-host mode. You must check whether all of the Fibre Channel targets are available through the fabric interconnect at VSAN 200. Which command must you use?

  1. show npvflogi-table

  2. show flogi-table

  3. show flogi database

  4. show zoneset active VSAN 200

Answer: A

Question No: 136 – (Topic 1)

Which option causes an operating system on a UCS device to consistently crash several minutes after booting?

  1. faulty power supply

  2. out-of-date network adapter firmware

  3. incompatible operating system driver

  4. incorrect boot order

  5. disabled trusted platform module

Answer: C

Question No: 137 – (Topic 1)

Which two options are ways to identify the exact BIOS version of a Cisco UCS C-Series Rack-Mount Server? (Choose two.)

  1. Use the iFlash32 command and select the -i option.

  2. Press F2 during server bootup.

  3. Press F6 during server bootup.

  4. Press F12 during server bootup.

  5. Press F10 during server bootup.

  6. Use the EFI interface.

Answer: A,B

Question No: 138 – (Topic 1)

A customer is troubleshooting QoS in a Cisco UCS domain due to high packet drops in the network. The customer has configured the vNIC and associated QoS policy, and changed the MTU from 1000 to 1200. Packet drops still exist. What is the cause of this issue?

  1. The MTU specified here must be greater than the MTU specified in the associated QoS system class. If this MTU value is less than the MTU value in the QoS system class, packets may be dropped during data transmission.

  2. The MTU specified here must be equal to or less than the MTU specified in the associated QoS system class. If this MTU value exceeds the MTU value in the QoS system class, packets may be dropped during data transmission.

  3. The MTU specified here must be less than the MTU specified in the associated QoS system policy. If this MTU value exceeds the MTU value in the QoS system policy, packets may be not be dropped during data transmission.

  4. The MTU must be optimized and should be changed to fc with the CLI command set mtu fc.

Answer: B

Question No: 139 – (Topic 1)

Which three statements explain why a Cisco UCS server cannot boot via SAN? (Choose three.)

  1. The correct VLAN must be configured.

  2. The correct WWPN must be specified in the service profile.

  3. The server must be able to ping the target.

  4. The correct boot order must be specified in the service profile.

  5. The boot LUN number must specify the appropriate operating system.

Answer: B,D,E

Question No: 140 – (Topic 1)

Which three methods can be used to upgrade the Cisco IMC? (Choose three.)

  1. host firmware package

  2. blade firmware package

  3. controller firmware package

  4. management firmware package

  5. directly on the blade, under the Installed Firmware tab

  6. directly on the blade, under the Blade Firmware tab

  7. directly on the blade, under Inventory gt; CIMC

Answer: D,E,G

100% Free Download!
Download Free Demo:300-180 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4cert 300-180 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4cert IT Certification PDF and VCE