[Free] 2017(Nov) Dumps4cert Testinsides Cisco 300-180 Dumps with VCE and PDF Download 11-20

Dumps4cert 2017 Nov Cisco Official New Released 300-180
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4cert.com/300-180.html

Troubleshooting Cisco Data Center Infrastructure

Question No: 11 – (Topic 1)

How can you set a Cisco UCS C-Series Server to export tech-support data for TAC to an external file server?

  1. CIMC to a TFTP server

  2. CIMC to an RCP server

  3. FSM to a TFTP server

  4. FSM to an RCP server

Answer: A

Question No: 12 – (Topic 1)

Which piece of information does the FSM provide?

  1. the current task and status

  2. a collection of blade statistics

  3. the last user to access the resource

  4. a list of faults currently suppressed by the Cisco UCS Manager

Answer: A

Question No: 13 – (Topic 1)

Refer to exhibit. A Cisco UCS admin is troubleshooting an issue with a vNIC not coming up on a blade. When looking at the CLI of the quot;Fabric Interconnectquot;,the admin runs this command to view the status of the interface. Which option describes a possible reason why the interface is stuck in an quot;initializingquot; state?

Dumps4Cert 2017 PDF and VCE

  1. The service profile is not applied to a blade.

  2. The VLANs defined on the vNIC are not defined on a matching uplink port.

  3. The uplink port is down.

  4. The QoS policy on the vNIC is invalid.

  5. The MTU on the vNIC is higher than the MTU configured in the QoS system class.

Answer: C

Question No: 14 – (Topic 1)

Which two statements about configuring a traffic monitoring session are true? (Choose two.)

  1. You can set a local VM as a traffic destination.

  2. You can have up to two active monitoring sessions simultaneously.

  3. An unlimited number of monitoring session can be stored.

  4. A newly created monitoring session is enabled by default.

  5. A destination port can also be a source port within the same session.

  6. A vHBA can be a source for either an Ethernet or Fibre Channel monitoring session, but not both.

Answer: B,F

Question No: 15 – (Topic 1)

Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server?

  1. ucs-c250 / # scope cimc

    ucs-c250 /cimc # scope tech-support

    ucs-c250 /cimc/tech-support # set path default.tar.gz ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /cimc/tech-support *# commit

  2. ucs-c250 / # scope system

    ucs-c250 /system # scope tech-support

    ucs-c250 /system/tech-support # set path default.tar.gz ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /system/tech-support *# commit

  3. ucs-c250 / # scope support

    ucs-c250 /support # scope tech-support

    ucs-c250 /support/tech-support # set path default.tar.gz ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /support/tech-support *# commit

  4. ucs-c250 / # scope fault

ucs-c250 /fault/tech-support # set path default.tar.gz ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /fault/tech-support *# commit

Answer: A

Question No: 16 – (Topic 1)

Which CLI command should you use to promote the local fabric interconnect to primary?

  1. cluster primary force

  2. cluster failover primary

  3. cluster force primary

  4. cluster failover

  5. failover

Answer: C

Question No: 17 HOTSPOT – (Topic 1)

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Dumps4Cert 2017 PDF and VCE

Answer:

Dumps4Cert 2017 PDF and VCE

Explanation: With four disks installed, the LSI MegaRAID 9260i defaults to no fault- tolerant configuration.

Question No: 18 – (Topic 1)

Refer to the exhibit. What can you deduce from this configuration?

Dumps4Cert 2017 PDF and VCE

  1. This configuration is not taken from a fabric interconnect.

  2. This configuration refers to an uplink port on the fabric interconnect.

  3. Fabric link Eth1/1/3 is pinned to uplink port Eth1/1.

  4. A server in slot 3 is pinned to link 1 between IOM and the fabric interconnect.

Answer: D

Question No: 19 – (Topic 1)

During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic?

  1. There is no interruption to traffic, as the fabrics go down one at a time.

  2. Traffic stops flowing until the process is complete.

  3. There is no interruption to traffic because both fabrics stay up the whole time.

  4. Traffic will continue to flow, but at a limited rate until the process is complete.

Answer: B

Question No: 20 – (Topic 1)

Which two options are Cisco UCS default user roles? (Choose two.)

  1. Administrator

  2. Server Equipment Administrator

  3. FCoE Administrator

  4. Server Resource Administrator

  5. LAN Administrator

Answer: A,B

100% Free Download!
Download Free Demo:300-180 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4cert 300-180 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4cert IT Certification PDF and VCE