[Free] 2017(Nov) Dumps4cert Testinsides Cisco 300-101 Dumps with VCE and PDF Download 201-210

Dumps4Cert 2017 Nov Cisco Official New Released 300-101
100% Free Download! 100% Pass Guaranteed!
http://www.Dumps4Cert.com/300-101.html

Implementing Cisco IP Routing

Question No: 201 – (Topic 7)

Which two statements indicate a valid association mode for NTP synchronization? (Choose two.)

  1. The client polls NTP servers for time.

  2. The client broadcasts NTP requests.

  3. The client listens to NTP broadcasts.

  4. The client creates a VPN tunnel to an NTP server.

  5. The client multicasts NTP requests.

Answer: A,C

Question No: 202 – (Topic 7)

What is the function of the snmp-server manager command?

  1. to enable the device to send and receive SNMP requests and responses

  2. to disable SNMP messages from getting to the SNMP engine

  3. to enable the device to send SNMP traps to the SNMP server

  4. to configure the SNMP server to store log data

Answer: A

Explanation: The SNMP manager process sends SNMP requests to agents and receives SNMP responses and notifications from agents. When the SNMP manager process is enabled, the router can query other SNMP agents and process incoming SNMP traps.

Most network security policies assume that routers will be accepting SNMP requests, sending SNMP responses, and sending SNMP notifications. With the SNMP manager functionality enabled, the router may also be sending SNMP requests, receiving SNMP responses, and receiving SNMP notifications. The security policy implementation may need to be updated prior to enabling this functionality.

SNMP requests are typically sent to UDP port 161. SNMP responses are typically sent from UDP port 161. SNMP notifications are typically sent to UDP port 162.

Question No: 203 – (Topic 7)

On which two types of interface is Frame Relay switching supported? (Choose two.)

  1. serial interfaces

  2. Ethernet interfaces

  3. fiber interfaces

  4. ISDN interfaces

  5. auxiliary interfaces

Answer: A,D

Question No: 204 – (Topic 7)

A route map uses an ACL, if the required matching is based on which criteria?

  1. addressing information

  2. route types

  3. AS paths

  4. metrics

Answer: A

Question No: 205 – (Topic 7)

Which two BGP neighbor states are valid? (Choose Two)

  1. established

  2. active

  3. stuck in active

  4. 2-WAY

  5. unknown

  6. DROTHER

Answer: A,B

Question No: 206 – (Topic 7)

Which two among the following are used to indicate external type of route in routing table? (Choose two.)

  1. D EX

  2. IA

  3. O E2

  4. R E2

  5. i L2

Answer: A,C

Question No: 207 – (Topic 7)

When ospf is forming an adjacency, in which state, the actual exchange of information in the link

  1. INIT

  2. loading

  3. exstart

  4. exchange

Answer: B

Question No: 208 – (Topic 7)

Refer to the following configuration command. router (config-line)# ntp master 10

Which statement about this command is true?

  1. The router acts as an authoritative NTP clock and allows only 10 NTP client connections.

  2. The router acts as an authoritative NTP clock at stratum 10.

  3. The router acts as an authoritative NTP clock with a priority number of 10.

  4. The router acts as an authoritative NTP clock for 10 minutes only.

Answer: B

Question No: 209 – (Topic 7)

Which parameter in an SNMPv3 configuration offers authentication and encryption?

  1. auth

  2. noauth

  3. priv

  4. secret

Answer: C

Question No: 210 – (Topic 7)

Which type of BGP AS number is 64591?

  1. a private AS number

  2. a public AS number

  3. a private 4-byte AS number

  4. a public 4-byte AS number

Answer: A

100% Free Download!
Download Free Demo:300-101 Demo PDF
100% Pass Guaranteed!
Download 2017 Dumps4Cert 300-101 Full Exam PDF and VCE

Dumps4Cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 Dumps4Cert IT Certification PDF and VCE